The Girth Hitch in Climbing: How It Works and When to Avoid It
Published Updated How we research
The girth hitch is one of the simplest knots in climbing, and it shows up everywhere: on a daisy chain, a personal tether, a sling around a tree or a runner on a harness. It is quick to tie and does not require a carabiner. It also has limits that many beginners miss, especially when it is used on a sling or a dynamic tether. Here is what the hitch does, where it belongs, where it does not and how to check one before you trust it. Always learn knots from a qualified instructor.
Products from this article
The highest-scoring picks from the buying guides this article links to. Scores are our editorial assessment, not customer ratings.
As an Amazon Associate we earn from qualifying purchases. This does not change our picks. Affiliate disclosure
New to Prime? Try Prime free for fast, free shipping on eligible items.
+ Dyneema and nylon blend webbing in a slim 12 mm width, described as lighter and more supple than traditional nylon runners
From our guide: The Best Climbing Slings
+ Two adjustable arms let you clip two points while moving between anchors
From our guide: Best Personal Anchor Systems
+ Assisted braking adds a margin of safety when catching falls
From our guide: Best Climbing Safety Gear
+ 12mm Dyneema is light yet easier to handle than ultra-thin slings
From our guide: The Best Climbing Slings

What a girth hitch is
A girth hitch, sometimes called a cow hitch, is made by passing a loop of sling or cord around an object and then threading the loop back through itself. When tightened, it grips the object and holds. It is often tied with a sewn sling, such as a nylon runner, and with a tether, and it allows an attachment without hardware.
The hitch is easy to learn, but easy does not mean harmless. Because the sling bends sharply as it wraps, it can lose strength compared with a straight pull, and manufacturers often warn about the reduction in strength.
You may see it used on the tie in points of a harness as a quick way to attach a lanyard. Some harness makers specifically allow this and some do not, so check the manual of your harness before copying what you saw someone else do.
Where climbers use it
Common uses include attaching a sling to a harness tie in point as a tether where the harness manufacturer allows it, wrapping a sling around a tree or a block as an anchor, and connecting two slings together. It is also sometimes used to attach a personal anchor system or a daisy chain, but many manufacturers prohibit this. Follow the manual of the product, and use the attachment method it specifies.
Climbers like it because it is fast and uses fewer carabiners. Always check the manual of the sling or tether before you use a girth hitch, as some manufacturers specifically recommend against it or prefer a different attachment method.
Strength and its limits
A girth hitch reduces the strength of the sling, since the bend at the hitch concentrates stress. How much it is reduced depends on the sling and the conditions, so follow the manufacturer's guidance. Manufacturers often publish the reduction for their slings, and the numbers vary depending on the material, such as nylon or Dyneema. Do not assume a number from another product applies to yours.
It is also not a good choice for dynamic loads in many cases, such as a fall onto a girth hitched sling used as a personal anchor. Manufacturers warn about shock loading, so follow your product's instructions and ask an instructor about safer options.
Common mistakes
A frequent mistake is tying the hitch loosely or with a twisted sling, which can let it slip or reduce its hold. Another is girth hitching a sling to the belay loop. Do not girth hitch a sling to the belay loop: harness manufacturers do not recommend attaching a sling to it, so follow the harness manufacturer's instructions for what may be attached there. A sling loaded in a way it was not designed for can also create side loading on a carabiner.
Girth hitching a sling around a sharp edge or an object with a small radius is another problem, as the webbing can be cut. Always inspect the object and the sling for damage and avoid sharp edges.
Do not treat a girth hitch as a stand in for a proper knot when you tie into a rope. The rope should connect to a harness with a knot taught by an instructor, such as a figure eight follow through, and not with a hitch made for slings.
Girth hitch versus other attachments
A lark's head, a cow hitch and a girth hitch are close relatives, and people sometimes mix up the names. What matters is how the loop is arranged and what it is attached to, so rely on the manufacturer's instructions and a qualified instructor, not on a name.
Other ways to attach a sling include clipping it with a carabiner or using a basket hitch around an anchor. Each affects strength differently and suits a different job. A ring bend is a knot for joining the two ends of webbing into a loop, not a way to secure a sling to a harness or an anchor, and it is not a substitute for a sewn sling. Ask an instructor which attachment fits your use, and follow the manufacturer's instructions for your gear.
Better choices in some situations
In many cases, a sling clipped with locking carabiners or a dedicated personal anchor system offers more control and clear manufacturer guidance. Many climbing instructors teach to use equipment as it was designed rather than improvising with knots.
If you are building an anchor with a sling, ask an instructor to show you the right way for your situation. Anchors depend on terrain and on the strength of the object you attach to, so there is no one size fits all.
Checking the hitch before you trust it
Look at the hitch and confirm that the two loops lie flat and parallel, that no twists remain and that the knot is snug. Pull on the sling to test it gently, and make sure that the object it surrounds is secure. Have a partner check it too.
Inspect the sling for wear every time you use it. Replace slings that show fraying, cuts or stiff areas, and follow the manufacturer's retirement guidance. A sling that is worn at the hitch area can fail even if the rest looks fine.
Learning it properly
Take a skills class at a climbing gym or with a certified guide, who can show how to tie the hitch, where to use it and what to avoid. Knots are best learned in person, with feedback, rather than from a diagram alone.
Practice on the ground and on safe set ups until you can tie it without thinking. Keep your skills fresh, and when you meet a new piece of gear, read the instructions first.
Attaching to an anchor with the rope
A girth hitch is a way to attach a sling or tether, but many climbers also need a quick, adjustable way to tie into an anchor using the rope itself. That is the job of the clove hitch, which grips a carabiner and lets you change the length with one hand. Its guide covers how it is tied, where it fits, and the mistakes to check for every time.
Popular right now
- The Best Climbing Nuts and StoppersBuying guide
- Best Belay DevicesBuying guide
- Best Headlamps for ClimbersBuying guide
- Bouldering vs Rope ClimbingArticle
- Climbing Photography BasicsArticle
- The Best Climbing SalvesBuying guide
Based on the last 28 days of search and visitor data.