PETZL Dual Connect Adjust Lanyard Red, Adjustable Double Lanyard for Climbing Review (2026)

Who this lanyard is built for

Petzl built the Dual Connect Adjust for climbers who need to stay clipped to two points at once, such as multi-pitch parties moving through anchor stations, sport climbers cleaning routes with two bolts, or via ferrata approaches that call for redundancy. The two-arm design means you can unclip one arm to move past an obstacle while the other keeps you attached, which single-tether personal anchors cannot do as cleanly. Climbers who only ever need one tether point, such as gym climbers or single-pitch sport climbers who are not managing anchor transitions, are better served by a simpler one-arm option like Petzl's own Connect Adjust, which does the same job with less bulk and lower cost.

How the two arms work

The lanyard pairs a fixed 45 centimeter arm with an adjustable arm that runs from 15 to 95 centimeters, both built from 9.0 millimeter dynamic rope rather than static webbing, so a short slip transmits less force to the climber than a sewn sling would. Petzl lists the total weight at 160 grams. An ergonomic rope adjuster on the flexible arm lets you shorten or lengthen it precisely, useful for snugging in close at a hanging belay or extending out to reach a bolt. A rubber ring keeps the carabiner oriented correctly inside the adjuster, and a small hole lets you clip a cord to unblock the rope if the adjuster gets weighted and jams.

Setting it up and what it needs

The lanyard installs on your belay loop with a simple girth hitch, and each arm needs its own locking carabiner, specifically Petzl's Sm'D TWIST-LOCK style, which are not included and add to the total cost. Petzl is explicit that this is a positioning lanyard without a dedicated energy absorber, meant for use only where the potential fall factor stays below 1, so climbers should read Petzl's technical notice before relying on it in situations with meaningful fall potential rather than assuming the dynamic rope alone makes it a fall-arrest system. Petzl backs the lanyard with a three year warranty. Rinse dirt out of the adjuster mechanism periodically and inspect the rope arms for fraying or stiff spots.

How it compares with single-arm and sling-style options

Against Petzl's own Connect Adjust, a single-arm version of the same adjustable rope lanyard, the Dual Connect Adjust adds a second independent tether at the cost of extra weight and bulk on the harness, worth it specifically for climbers managing anchor transitions rather than simple top rope cleaning. Against sewn sling personal anchors like the Metolius PAS, the dynamic rope construction here should transmit less force in a short slip than static nylon webbing, though neither style is a substitute for a rated energy-absorbing lanyard on routes with real fall potential.

Verdict and who should pick something else

Choose the Dual Connect Adjust if you regularly need two independent, adjustable clip-in points, such as cleaning multi-bolt anchors or moving through multi-pitch stations, and you are willing to buy locking carabiners separately. It is not the lightest or cheapest personal anchor on the market. Climbers who only need one tether point should look at the single-arm Connect Adjust instead, and anyone planning to use a lanyard where a real lead fall is possible should follow Petzl's own instructions on fall factor limits rather than treating this as a fall-arrest device.

Frequently asked questions