Independent buying guides for climbing gear

Using an Assisted Braking Belay Device: What Climbers Should Know

Published How we research

Assisted braking belay devices, with the Petzl GriGri the best known example, have a cam inside that pinches the rope when a climber falls. Many people assume that makes belaying foolproof, and that belief is the most dangerous mistake of all. The device helps, but the belayer's brake hand still has to stay on the rope at all times. This article explains how these devices work in general terms, what habits matter, and where to get proper instruction. Always follow the manufacturer's manual for your specific model.

Products from this article

The highest-scoring picks from the buying guides this article links to. Scores are our editorial assessment, not customer ratings.

As an Amazon Associate we earn from qualifying purchases. This does not change our picks. Affiliate disclosure
New to Prime? Try Prime free for fast, free shipping on eligible items.

A climber's back showing harness, carabiners, and coiled rope in an outdoor setting
Photo: BOOM 💥 Photography on Pexels

How the device works

Inside an assisted braking device is a cam that rotates when the rope is yanked quickly through it, pinching the rope against the body of the device. Slow movements, such as a normal feeding of slack, pass without locking, while a sudden pull of the kind that follows a fall causes the cam to grab.

The result is that the device can help hold a fall even if the belayer reacts late. According to manufacturers, though, the system is designed as an assist and is not a replacement for a trained belayer. Speed of the rope, rope diameter and condition can all affect how it behaves.

Manufacturers also note that a device can behave differently with wet, icy, very new or very worn ropes. Treat any change in how the rope feeds as a prompt to stop and check the setup before you go on.

The rope must match the device

Each model is made for a stated range of rope diameters, and manufacturers say to stay inside that range. A rope that is too thin may slip through, and one that is too thick can feed poorly or stop the cam from working as intended. New ropes are often stiffer and can behave differently from broken in ones.

Check the manual for your model and the diameter printed on your rope tag. If you borrow a partner's rope, confirm that it fits the device. A quick check before you climb is easy, and it avoids guesses about how the device will behave.

Compare assisted braking belay devices →

Brake hand rules still apply

The most important rule is the same as with any belay device: keep your brake hand on the brake strand of the rope whenever the climber is on the wall. The cam can fail to lock if it is held open by a thumb or if the rope moves very slowly during a fall, so a hand on the rope is the backup.

Many instructors teach that you should never hold the handle open and let go of the rope with your brake hand. Practice the exact method for your device with a qualified instructor, because the position of your hands, your thumb and the handle all matter.

Feeding slack and lowering

When a lead climber needs rope quickly to clip, the belayer has to feed slack smoothly. Techniques for this can differ from a regular tube device, and the wrong approach can open the cam too far or leave you without control. Instructors usually teach drills for fast feeding, and you should get those from a person who can watch you.

Lowering a climber is another point where care matters. Opening the handle too wide can make the rope run too fast, so the belayer lowers by easing the handle gradually while the brake hand stays on the rope. Do not try new lowering styles on a real climber until your instructor has shown that you can do them.

Common mistakes to avoid

Mistakes with these devices include threading the rope the wrong way around, which the manual shows with an illustration on the side of the device, leaving the brake hand off the rope, and forgetting a locking carabiner. Some climbers also grab the handle in a panic during a fall, which releases the cam.

Another problem is complacency. Belayers who trust the device completely may drift into chatting or looking away. Treat the assist as a bonus, and keep your attention on the climber and the rope.

Care and inspection

Keep the device clean and dry, since dirt and grit can affect the cam. Follow the manufacturer's guidance on cleaning, and look for worn edges, damaged teeth or a cam that does not move freely. If you spot something odd, stop using it and ask the manufacturer or a retailer.

Store it away from chemicals and heat. Many manufacturers specify a retirement period or inspection routine, so read the instruction sheet that comes with your model and keep it handy.

Compare belay devices →

Getting proper instruction

Take a class at a climbing gym or with a certified instructor before belaying with an assisted braking device, even if you have used a tube style device. The techniques differ, and a trained eye can catch bad habits that you might never see yourself.

Most gyms will test your belaying before you climb on ropes, and they can answer questions about their own rules. Ask them about the devices they approve and the commands they expect, so you are ready the first time you step up to the wall.

Belay device types explained →

Where these devices fit in your climbing

Assisted braking devices are popular for top rope belaying at gyms, for lead belaying and for belaying a climber who is working a route with many falls. Because the cam helps hold a climber's weight while they rest, belayers also use them to give a partner a break on a hard move.

They are usually heavier than basic tube devices, so many climbers keep both types. A tube style device is still a good tool for rappelling, which most assisted braking models are not designed for in the same way. Check the manual before using any device for a different purpose, because each has limits.

Popular right now

  1. The Best Climbing Nuts and StoppersBuying guide
  2. Best Belay DevicesBuying guide
  3. Best Headlamps for ClimbersBuying guide
  4. Bouldering vs Rope ClimbingArticle
  5. Climbing Photography BasicsArticle
  6. The Best Climbing SalvesBuying guide

Based on the last 28 days of search and visitor data.