C.A.M.P. Kinetic Rewind PRO Ferrata Set Review (2026)

What the Rewind system solves

Via ferrata sets typically have two elastic covered arms ending in carabiners that clip to the cable, and the biggest everyday annoyance with basic sets is that the arms hang loose and can dangle, snag or get stepped on while a climber walks the approach or descent trail between cabled sections. C.A.M.P.'s Kinetic Rewind PRO addresses this with elasticated arms built into a Rewind system, made from 19 millimeter polyester webbing that automatically shortens to about 90 to 110 centimeters when not clipped to the cable, based on the manufacturer's published specifications. The PRO designation refers to a higher spec build aimed at guides and frequent users, sitting above C.A.M.P.'s standard Kinetic set in their via ferrata lineup.

Key specs and hardware

The set weighs about 550 grams according to manufacturer listings, and pairs the Rewind webbing arms with two way auto locking carabiners that use a Keylock nose to resist snagging on the cable, with a 30 millimeter gate opening sized for standard via ferrata cable. A sewn in energy absorber is built into the harness end of the set to reduce the force transmitted to the climber in a fall, and C.A.M.P. certifies the set to EN 958 and UIAA 128, the relevant European and international standards for via ferrata equipment, with a stated user weight range of roughly 40 to 120 kilograms.

Using it on a cabled route

In use, a climber clips both auto locking carabiners to the cable and, thanks to the elastic Rewind arms, the slack retracts automatically so the arms stay short and tidy rather than trailing on the ground or catching on rock features during the approach hike. This matters most on longer via ferrata routes with mixed walking and cabled sections, where loose arms on a basic set can become a real annoyance over several hours. Guides and frequent via ferrata users are the target audience for the PRO version specifically because the elastic components see more wear cycles and benefit from the higher spec construction, while occasional users on a single vacation route may not need the upgrade.

How it compares with other ferrata sets

Against Petzl's Scorpio Vertigo, which uses a similar compact absorber and elastic arm concept with wire lock carabiners, the Kinetic Rewind PRO takes a different mechanical approach to keeping arms tidy, and the choice between them often comes down to carabiner style preference and fit with a climber's existing harness setup. Compared with C.A.M.P.'s own non PRO Kinetic sets, the PRO version costs more and is aimed at climbers who use a via ferrata set often enough that the elastic arms and auto lock carabiners see meaningful wear, where the upgraded materials pay off over time. Climbers who only plan one or two via ferrata trips a year may find a basic set adequate.

Who should choose this set

The Kinetic Rewind PRO fits climbers and hikers who do via ferrata routes regularly, guides who use a set daily, and anyone who has been annoyed by loose dangling arms on a basic ferrata set during long approach or descent walks. The auto locking carabiners also reduce the chance of an accidentally unclipped arm compared with manual gates, which is a meaningful safety convenience on exposed cable sections. Casual or first time via ferrata visitors who only need a set for a single trip may be better served by a simpler, less expensive set, while frequent users will likely appreciate the durability focus of the PRO construction. As with all via ferrata gear, always follow C.A.M.P.'s instructions for inspection, clipping technique and weight limits before use.

Frequently asked questions